B0010
Passenger Frontal Stage 1 Deployment Control
High· Fix promptlyProfessionalBodyGeneric, all makes
What it means
The airbag control module has detected a fault in the deployment circuit for the passenger front airbag (stage 1). Until it is fixed, that airbag may not deploy in a crash.
Is it safe to drive?
The car drives normally, but the airbag system may not protect you in a crash. Get it repaired promptly. Never probe airbag wiring yourself; airbags can deploy and cause injury.
Symptoms
- Airbag (SRS) warning light on
Probable causes
Most likely first
- 1Loose or damaged connector under the seat or behind the dash
- 2Damaged wiring or connector
- 3Failed airbag module
- 4Disturbed connectors after seat or dash work
How to diagnose it
Work through these in order before buying parts
- 1Have a qualified technician read the SRS module codes and resistance values with a capable scan tool.
- 2Disconnect the battery and wait the time stated by the maker before touching any airbag parts.
- 3Check for technical service bulletins (TSBs) or software updates for your make and model; some codes have known factory fixes.
Common fixes
- Replace the clockspring
- Repair the connector or wiring
- Replace the airbag module
- Clear the SRS code with a capable scan tool
This information is general guidance for all makes. Exact causes, specifications and procedures vary by vehicle, so confirm with your service manual or a qualified mechanic before replacing parts.